Fractional E1-1*10/100BaseT Ethernet converter

Fractional E1-1*10/100BaseT Ethernet converter

Model:BD-FE1-ETH
Functions
Model BD-FE1-ETH is a single port E1 with Ethernet Bridging that provides high-speed
LAN-to-WAN connectivity. Plugging directly into the 10/100Base-T port of a hub or LAN switch, the FE1-ETH provides E1 access at connection data rates of N*64Kbps(N=1~32). The FE1-ETH is an excellent choice for internet access as well as LAN-to-LAN services

PRODUCT FEATURE
Have two row of LED , one indicate local status, the other indicate remote status
Remote adjustment of velocity for the remote device is available, you can set the
velocity of one side, and the velocity of the other side can auto adjust.
Based on FPGA, easy to upgrade
the interface of LAN is 10/100M ,full/duplex auto-negotiation
LAN interface support 802.1Q(VLAN) protocol
Provide LAN auto reset function , run more stably
Support three clock modes, E1 master clock，E1 external clock and receiver
recover clock.
Have three LoopBack Mode: E1 interface LoopBack(ANA)、LAN interface
LoopBack(DIG)、command the remote LAN interface LoopBack (REM)
The Product incorporates V.54 compliant local/remote loopbacks and V.52
compliant 511/511E test patterns, which is be great convenient for
installation and debug the device.
 E1 port support BNC 75-ohm dual coax and RJ45 120-ohm twisted-pair
G.703 connections provided, support 75ohm/120ohm adapt;
 One console port for selection on your order
 220VAC & -48VDC power options and the positive and negative of DC-48V
can be optional because there is the self-test circuit for the polarity inside
the device
 it can realize SNMP function in our chassis installation
 the function as when E1 link fails, Ethernet date stops transmit for option;
 Can realize SNMP management in our chassis installation

E1 Interface
>Line Rate: N*64Kbps(N=1~32) or 2.048Mbps±50ppm
> Line Code : HDB3
> Interface Standard: ITU-T G.703
> E1 Impedance: 75Ω(unbalance) and 120Ω(balance)
> Connections : dual coax BNC and 120-ohm twisted-pair
(RJ45)
> Jitter tolerance : finer than G.742 and G.823

10/100 Base –T interface
>Rate: 10/100M, full/duplex auto-negotiation
>Protocol: Support IEEE 802.3,IEEE 802.1Q (VLAN)
>MAC Address Entiries: 4096 Entiries
>Total Memory Sizes: 64MBits SDRAM
>Physical interface: RJ45, support AUTO-MDIX

Power supply
working voltage range wide, good
anti-disturb and Isolation, work stable
option I – DC-48V,range DC-36V~DC-72C
option II – AC220V,range AC165V~AC240V
Power Consumption: <=3 Watts

Enviroment condition
Operating temperature: 0C~+50 C
Storage temperature: -20 C~+70 C
Relative temperature:95% (uncondensed)

Dimension
 210mm(L)
 140mm(W)
 30mm(H)